Limited Edition 2015 SP Fireblade ...

Latest offers on new Hondas, used bikes, parts and clothing NEW HONDA USED BIKES PARTS & ACCESSORIES CLOTHING
Honda Fireblade CBR1000RR SP
Fireblade SP ABS

A track-focused CBR1000RR Fireblade featuring Öhlins front and rear suspension, Brembo mono block front brake calipers, single seat unit and special Repsol race replica paint and sharing the CBR1000RR’s uprated cylinder head and power boost, plus factory-matched engine internals.

NEW HONDA CBR1000RR SP FIREBLADE ABS £14,399 on the road
including 24 months Honda warranty & AA cover
Call us on 0161-432 1303 or contact us here


Fireblade CBR1000RR SP Overview :

Click on the pics below to see the bike in detail :
2015 Fireblade SP Repsol Fireblade SP
Reposl Replica Paintwork SP Exhaust
SP Instrument Panel Brembo Monobloc Brakes
Special SP Seat Cowl CBR1000RR SP Fairing Detail


For 21 years Honda has pursued a concept of ‘Total Control’ with the Fireblade, after rewriting the rulebook in 1992 with the original CBR900RR. Over the last decade the CBR1000RR has developed into perhaps the most balanced Super Sport machine available, combining exceptional performance and handling with a satisfying ability to extract the very best from every rider.

Victories in the World Super Bike (WSB) championship and all-conquering success at the Isle of Man TT, with average lap speeds of 130mph plus over 37.73 miles of real roads racing, is testament to the CBR1000RR’s innate capacity.

The open-class CBR has built a loyal army of fans around the world over two decades especially – with over 200,000 sold – throughout Europe. And in response to demand from a hard-core of performance enthusiasts Honda – for the very first time – in 2014 is producing the CBR1000RR Fireblade SP. A track-focused, yet fully road legal, version of the bike that not only looks special – it is special.

Model Overview

In Japanese to give something ‘edge’ is to add polish. And for the dedicated track day goer that’s exactly what the CBR1000RR Fireblade SP has been given: ‘Total Control’ with an extra edge.

The chassis wears circuit-ready front and rear Öhlins suspension plus Brembo four-piston mono block calipers, with frame revisions and new top and bottom yokes to suit. Honda’s electronic Combined Anti-lock Brake System is an option, with software remapped appropriately. Pirelli Diablo Supercorsa SP tyres are the finishing touch.

The 999.8cc inline four-cylinder engine gets the same updated cylinder head as the standard 2014 CBR1000RR Fireblade, with improved inlet/exhaust gas flow and combustion efficiency, and the extra 2kW peak power boost. However it features factory-matched pistons and con-rods, to ensure optimum internal balance.

As a track-focused machine there’s no provision for a pillion and a sleek single seat unit saves weight. Further marking the SP version out from standard is its own unique Tricolour paint – white and two-tone blue, with a central red stripe and trademark Honda gold wheels.


The CBR1000RR SP’s die-cast aluminium twin-spar frame is based on that of the standard machine, with modifications to match the Öhlins suspension. Tuning the frame to increase rider feedback with the suspension’s different performance parameters proved critical during development and the rigidity balance around the rear suspension mount has been revised to give more flex – and therefore feel – for traction.

The Öhlins inverted front fork has an outer diameter tube of 55mm (1mm more than the Showa unit) and the revised top and bottom yoke use a steel, rather than aluminium, steering stem. The top yoke itself features high precision CNC machining and features a greater surface area in contact with the forks, improving rigidity.

As on the CBR1000RR the aluminium gull-wing swingarm operates through MotoGP-derived Unit Pro-Link rear suspension. Rake is set at 23° 30’ with trail of 96mm and wheelbase of 1410mm. Kerb weight is 199kg with front/rear weight distribution of 52.7%/47.3%

The second-generation Honda Electronic Steering Damper (HESD) monitors speed and tailors damping force accordingly. It enhances stability at high speed by minimising sudden steering angle changes, while also leaving the steering untouched – and light – at low speed.

The SP version has the same aggressive riding position as the standard machine, offering outstanding control, leverage and acceleration. Compared to the 2013 year model CBR1000RR, the footpegs are set 10mm back and the handlebars are wider, lower (by 1°) and further forward (by 5°). A new rear subframe – with no need to support a pillion – is lighter and the revised seat material firmer. A new screen delivers improved high-speed aerodynamics rather than wind protection.

Specialists from Öhlins worked with Honda’s engineers and test riders during all stages of development. Fully adjustable, the 43mm inverted fork and rear shock were developed specifically for the CBR1000RR SP, to offer superbly balanced all-round performance and greater potential for cutting lap times on a closed circuit.

The 12-spoke cast aluminium wheels perfectly complement the new suspension setup. The front 17in x 3.50in rim wears super-sticky, track-ready – and fully road legal – Pirelli Diablo Supercorsa SP tyres; a 120/70-ZR17 front and a 190/50ZR17 rear on a 17in x 6in rim.

Brembo mono block four-piston calipers were chosen because of their compatibility and performance potential with the Öhlins fork. The caliper body is standard but Brembo manufactured special pistons for use in the new machine, with pad material designed to give consistent and linear feel when braking hard from high speed.

Electronic Combined ABS

Honda’s high-performance electronically-controlled Combined Anti-lock Brake System (electronic Combined ABS)is an option on the CBR1000RR SP. The system has been used in every race since 2010 in the IDM German national championship by the Holzhauer Racing team, whose rider Karl Muggeridge won the series in 2011. It has also been used by the Honda TT Legends team in the Endurance World Championship series since 2011. Know-how gained in racing has led to continued refinements of the system.

Electronic Combined ABS has a high level of precision and adjustability, due to the fact that it is a ‘brake-by-wire’ system. A dedicated ECU converts hydraulic pressure from the front and rear brake into an electronic signal passed to power units which in turn generate hydraulic pressure at the calipers.

The system’s electronic control has numerous benefits. Firstly, it eliminates the “pulsating” effect on the brake lever associated with conventional motorcycle ABS technology. It also allows the system to be activated instantly as soon as tyre slip is detected, minimising loss of grip and eliminating the possibility of locking a wheel. It also means there is absolutely precise control of the speed at which the brake callipers are activated. The result is extremely stable and neutral bike behaviour, giving the rider maximum feel and confidence, even under hard braking,

For the CBR1000RR SP, know-how gained in racing has been reflected in refinements to the system. Compared to the standard machine, activation of the rear brake distributes less braking force to the front. The adjustability of the electronic system has also been used to make initial activation of the ABS system even more gradual and smooth.

The combined element of the system varies the distribution characteristics of braking force as the front or rear brakes are applied and released. The system is set up so that when the rear brake is applied gently, the front brake is not activated. This allows the rider to use only the rear brake for small adjustments to speed, useful in Super Sports riding such as when settling the bike for corner entry. In this area too, feedback from racing activities has led to a new programme for the CBS activation. As the rider releases the front brake, the rear brake is released more quickly to allow lean angle to be maintained more easily through the corner.


The CBR1000RRSP’s 999.8cc, 16-valve inline four-cylinder engine has the same cylinder head updates as the standard machine. The inlet and exhaust ports have been re-shaped and polished with the combustion chambers ‘gas-flowed’ to improve efficiency.

Gas-flowing (flow-testing through an air-flow bench) effectively improves both the quality and quantity of airflow at high rpm when air resistance becomes much greater; increased combustion efficiency and outright power results. The valve seats have also been revised to match the cylinder head work and the intake funnels are now ‘slash cut’, a design used in WSB.

Where the SP differs is the selection of ‘middle value’ pistons as the engine is manufactured. Essentially a factory blueprint, each batch of pistons and rods are weighed and those that most closely match the middle tolerance – and each other – are used. This injects an even greater level of balance into the engine, especially at the high rpm generated on track.

Bore and stroke is set at 76mm x 55.1mm with compression ratio of 12.3:1. A nickel-silicon carbide (Ni-SiC) surface treatment on the cylinder walls reduces friction and ensures reliability. At 35mm (from 38mm) the exhaust pipe diameters are smaller, increasing torque and a new vertical connecting pipe balances pressure between cylinders two and three. Peak power of 133kW – up 2kW – arrives at 12,250rpm; torque is improved in the 4-6,000rpm area, peaking with 114Nm delivered at 10,500rpm.

The Programmed Dual Sequential Fuel Injection system (PGM-DSFI) has been remapped to match the revised cylinder head and exhaust. It deliversprecise fuelling and an accessible power delivery, perfect for driving hard out of slow-speed corners. At throttle openings of up to 25% the PGM-DSFI delivers relatively fine and consistent changes in power and torque output – perfect for extracting maximum drive at full lean. As throttle openings become larger, the changes in output are progressively greater and the overall result (at the throttle) is an engine that responds with great accuracy to rider input, giving superb feel from the rear tyre and highly usable, linear acceleration.

The MotoGP-derived slipper clutch ensures full power transmission together with ultra-smooth gear shifting and light feel at the lever. In the critical hard braking, back-shifting corner-entry phase it decreases the torque passed from engine to the rear wheel, reducing the chance of traction loss and increasing stability.

Combined with the chassis changes ‘Total Control’ is elevated to a whole new level and the CBR1000RRSP has the potential to turn in significantly lower lap times than the standard machine.


The CBR1000RRSP uses a new ‘wave’ design ignition key; it offers improved security and its compact size greatly reduces the chance of breakage. Also new is the fuel tank cap – it uses an improved breather design for better venting.

Instrumentation is a multi-function LCD with a cockpit display dominated by the digital bar-type linear tachometer that scrolls left to right as engine speed increases.

Beneath this are the main numerical readouts: gear position, coolant temperature, speedometer, clock/lap time, trip/fuel efficiency/fuel consumption and odometer/numerical tachometer. At the bottom of the display are lights for headlight high beam, neutral and indicators.

Clear and easy to read in all light conditions, the tachometer has four display modes: Conventional, which uses black LCD segments to show current rpm; Reverse, which employs black LCD segments to show remaining rpm. Peak Hold indicates rpm in the conventional way and also leaves a tell tale segment showing the peak rpm achieved while Single Segment uses a single block to show current engine speed. In addition the odometer may be switched to display engine rpm numerically.

The lap timer features four modes. The display can also show fuel consumption, average fuel efficiency, distance travelled and total elapsed time. To assist debriefing after a session, lap time recall mode shows the fastest lap time and the lap on which it was set.

To ensure gear shifting at the optimum engine rpm, the 5-level shift indicator display uses highly visible white LEDs, adjustable for brightness. They illuminate sequentially as engine rpm rises, finally blinking at a chosen pre-set rpm (default is 13,000rpm but this can be set between 4,000rpm and 13,000rpm). The interval between sequential illumination can also be set at 0,200 or 400rpm.

The CBR1000RR SP can be personalised with a range of Honda Genuine Accessories. And like all Honda Genuine Accessories those for the CBR1000RR fit perfectly because they have been developed alongside the model. They are all subject to Honda’s rigorous testing procedures to make sure they adhere to our exacting quality standards, which is why they’re offered with a two-year Honda warranty.

A painted hugger protects the rear shock absorber from dirt splashes and also adds a high-class, sporty look. The single-piece unit is available in bodywork colours to create a seamless sporting entity.

Carbon-fibre accessories
A range of carbon-fibre accessories give the CBR1000RR the ultimate sports finish and underline the machine’s rich racing heritage. The carbon-fibre hugger is based on that used on the Repsol Honda RC213V in MotoGP and features a Honda Racing logo. An optimised number of carbon layers ensure the perfect balance of weight, handling and durability.

Similarly, at the front end, a carbon-fibre mudguard also reflects the CBR1000RR’s racing pedigree with a Honda Racing logo, while its soft edges and clear coating exude class.

A set of quality carbon-fibre crankcase covers protect the powerplant with an advanced composite cover on the left and, on the right, also protecting the clutch cover, a guard featuring the Honda Racing logo.

High windscreen
A black-tinted high windscreen – 27mm higher than standard – gives added wind protection, while complying fully with European homologation regulations. It also integrates perfectly and, even with its side stays, does not compromise visibility, drivability or manoeuvrability. To underline the CBR1000RR’s racing heritage, a Honda Racing logo is featured on the high screen.

Other accessories:

· Averto alarm
· A series of tank pad and fuel filler cover sets
· A comfort seat E-cushion
· A rear maintenance stand
· 2 indoor cycle covers and an outdoor cover
· A tank bag
· A wheel sticker set
· A Honda OptiMate 5 battery optimiser
· A fairing scuff guard set

Type Liquid-cooled 4-stroke 16-valve DOHC inline-4
Displacement 999.8cm3
Bore & Stroke 76 x 55.1mm
Compression Ratio 12.3:1
Max. Power Output 133kW @ 12,250rpm(F-type: 78kW @ 11,000rpm)
Max. Torque 114Nm @ 10,500rpm(F-type: 86Nm @ 7,000rpm)
Oil Capacity 3.7L
Carburation PGM-DSFI electronic fuel injection
Fuel Tank Capacity 17.5L
Fuel Consumption 18.0km/l ( WMTC mode*)
Starter Electric
Battery Capacity 12V/6AH
ACG Output 409W
Clutch Type Wet, multiplate with diaphragm spring
Transmission Type 6-speed
Final Drive #530 O-ring sealed chain
Type Diamond; aluminium composite twin-spar
Dimensions (L´W´H) 2,080 x 720 x 1,141mm
Wheelbase 1410mm
Caster Angle 23° 30'
Trail 96mm
Seat Height 820mm
Ground Clearance 130mm
Kerb Weight 199kg (ABS: 210kg)
Type Front Telescopic inverted fork with an inner tube diameter of 43mm, and a NIX30 (OHLINS) Front Fork with preload, compression and rebound adjustment, 120mm stroke
Type Rear Unit Pro-Link with gas-charged TTX36 (OHLINS) damper featuring 8mm preload and 22 click compression and 22click rebound damping adjustment. 60mm stroke.
Type Front 12-spoke cast aluminium
Type Rear 12-spoke cast aluminium
Rim Size Front 17M/C x MT3.5
Rim Size Rear 17M/C x MT6
Tyres Front 120/70 -ZR17M/C (W)
Tyres Rear 190/50 -ZR17M/C (W)
ABS System Type Electronic Combined ABS
Type Front 320 x 4.5mm dual hydraulic disc with 4-piston Brembo Monobloc calipers and sintered metal pads
Type Rear 220 x 5mm hydraulic disc with single-piston caliper and sintered metal pads
Instruments Gear position, coolant temperature, speedometer, clock/lap time, trip/fuel efficiency/fuel consumption and odometer/numerical tachometer
Security System HISS
Headlight 12V, 55W x 1 (low)/55W x 2 (high)
Taillight LED

All specifications are provisional and subject to change without notice.

# Please note that the figures provided are results obtained by Honda under standardised testing conditions prescribed by WMTC. Tests are conducted on a rolling road using a standard version of the vehicle with only one rider and no additional optional equipment. Actual fuel consumption may vary depending on how you ride, how you maintain your vehicle, weather, road conditions, tire pressure, installation of accessories, cargo, rider and passenger weight, and other factors.

2015 Model Fireblade SP On The Track

Find out more :

  • Go back to Hunts Motorcycles home page here


Hunts Motorcycles
255 Kingsway
M19 1AN

Like us on Facebook Follow us on Twitter Hunts YouTube Channel Check us out on Pinterest! Check us out on Pinterest!